Emergency Service Needed? We arrive within 45 minutes

CALL NOW! 24/7 1.888.551.0514
Show Services

Home Owner Typical Concerns

How bad is it for my Health?

mold removal services

Mold growth can have various health affects to individuals based on the type of mold present, the quantity of mold spores and the individual’s immune system. The symptoms that may arise from mold can vary but typically are, respiratory issues, sneezing, itchiness, and allergic reactions.

If you have not had a long-term exposure to mold and you are in good health, it is known that any change to the environment (removing all mold contaminates) will allow your body and immune system to fight and remove the bacteria from itself.

If you have had long-term exposure, it is important to speak to your physician.

What is the Mold Removal Procedure?

mold removal company

Once mold is identified we will send out one of our certified inspectors. The inspector will examine the mold growth and explain the step-by-step procedure and provide a scope of work of how we remove and remediate the contaminates followed by an estimate. This inspector will be the dedicated manager and the direct point of contact for your project.

Canada’s Restoration Services follows all guidelines set by IICRC and the Canadian Construction Association for mold removal Toronto and the GTA locations.

Finding and Fixing the Source

mold testing and removal services

During the inspectors visit they will seek the cause of the growth and identify the source if possible. Not always is the source is easily identifiable and noticeable. The inspector will explain the proper methods and maintenance tips on how to ensure mold growth will not re-grow. We use the most advanced technology in the market (i.e. Thermal imaging). Should the source not be found during the inspection it is generally found during the work.

How Long Does it Take?

Canada’s Restoration Services has significant amount of resources to provide the quickest response. Any projects can take a minimum of 48 hours (including equipment on site, to capture all mold spores)

What are the Costs for Mold Removal?

The mold removal cost will depend on the type of project and the resources required to complete it. The average price can vary per room depending on the area of the mold growth and the severity. Speak to one of our cerified project managers to consult on the best course of action to remediate your mold.

Why CRS?

mold and asbestos removal services

Experienced Professionals
All of our managers, inspectors and technician are IICRC certified

All of our mold removal jobs come with a completion form for proof that all mold has been removed. Any mold removal procedures in attics come with a 10 year warranty*

Licenced, Insured and Bonded
Canada’s Restoration Services holds a 5 million liability insurance, as well as a 5 million dollar pollution liability. We ensure that any job that we perform will be held to the highest standards and will be covered.

How to Book the Procedure?

mold remediation services

Call to Book inspection
We provide next day or the following day inspections based on the availability of our project managers. 

Manager inspects/estimates
Once a manager or inspector takes a visual inspection of the damage to your property, they will in turn create a free scope of work and build a free estimate on the repair.

Book Job
With one direct contact and project manager that will aid and guide you through the entire process will book and manage the job.

How is the Job Performed?


  1. Areas will be sealed off with 6 mil poly Containment is built to eliminate cross-contamination
  2. Implement negative air pressure assist in prevention of cross contamination.
  3. Perform an Immediate remediation of the mould in the attic.
  4. Remove the mould of the sheets and studs using media blasting solution.
  5. Perform thermal fogging of attic area with antimicrobial spray.
  6. Hepa vacuum and wipe down with anti-microbial all the sheets.
  7. Leave equipment- Air Scrubber- Negative air system for 48 hours.
  8. Thermal fog (2nd application) attic area with antimicrobial solution.
  9. Thermal fog and wipe down containment area upon exit.

mold removal services


We Work with All Insurance Companies

We are committed to working with every insurance company across Canada

Please, enter a valid value